Hawk Mighty Mini Floor
Grinders, 10" & 13"
-- USA Made --

10" & 13" - High Torque, Low RPM

• Direct connection from the motor to the grinding head:

  • maximizes energy and efficiency

  • reduces amp draw by avoiding friction loss, wear and ongoing maintenance vs. planetary belt-drive grinders

• Maintenance is minimal if any vs. constant maintenance and expensive repair cost with a planetary grinder

• Direct drive connection from the motor to the drive plate eliminates belts and pulleys from breaking (i.e. used in a planetary grinder)

• Direct-gear drive design optimizes the grinder's weight and rotational speed

• APPLICATIONS:  HD, High Torque Concrete Grinding, Coating Removal, Scarify Concrete, Polishing, Maintenance.

• With a wheels-down machine, it takes minutes to master

• A wheels-up or swing machine, they're harder to control, requires a long learning curve, often taking days to master.

Why a Mighty Mini Floor Grinder?:

1. Reduce Grueling Knee Work - Cost of detail / on your knees work is 45% of labor
2. Optimum Chose for Productivity & Perfection - Uses the same diamonds as a larger machine which means the scratch pattern is the same versus using a hand grinder whose scratch pattern is different.

$989.65      
10" High Torque Mini Floor Machine w/ XHD Gears, 1.0" HP TEFC 115/230v 60 Hz Motor, Weight:  71 lbs.

$229.00      
--- Dust Control Kit, 10" Floor Grinder

Diamond Driver Plate, Sold Separately - Size:  9-5/8".  Fits the 10" Machine.  With clutch plate, attaches to the grinder's 3-tab driver.  Accepts a complete assortment of diamond tools to scrape, grind, scarify, remove coating, polish, restore - concrete, granite, marble.

 

$1,012.60      
13" High Torque Mini Floor Machine w/ XHD Gears, 1.0" HP TEFC 115/230v 60 Hz Motor, Weight:  71 lbs.

$239.00      
--- Dust Control Kit, 13" Floor Grinder

Diamond Driver Plate, Sold Separately - Size:  12-5/8".  Fits the 13" Machine.  With clutch plate, attaches to the grinder's 3-tab driver.  Accepts a complete assortment of diamond tools to scrape, grind, scarify, remove coating, polish, restore - concrete, granite, marble.

USA Engineered, Designed & Made
HD, All American Components Built into Every Hawk Grinder

Features

• Dual Voltage:  120 or 240 volt, easy to switch - 5.9 maximum amp draw @ 120 volt

• Foot Operated Tilt Back for Easy Transporting

• Dual steel operating triggers with negative pressure on/off switch

• All steel construction with welded, powder-coated frame

• 1" x 5" non-marking load bearing, ball bearing wheels

• Thumb-operated safety switch with comfort cushion grips

• Optional dust control glide skirt with 1-1/2" vacuum port
• PORTABLE - EASY TO TRANSPORT:  One man handling through doorways, down stairs, across rough terrain
• OPTIONAL DIAMOND DRIVER PLATE - Accepts all the diamonds to grind, scarify, remove coatings, polish concrete and stone floors.

Specifications

Related Products

Diamond Driver Plate (right) Accepts a complete assortment of diamond tools (shown below) to grind, remove coatings & sealers including thick tar, polish and scarify concrete, granite and marble floors. plates equipped with metal 3-keyway clutch plate (right), the industry standard for rotary grinders and buffers - prevents bodily injury and damage to the plate and grinder < click here for additional info and to order >
Diamond Tooling The following diamonds install into the recessed and magnetic slots of the Diamond Driver Plate (above) The 9-5/8" driver plate holds (3) tools and the 12-5/8" driver plate holds (6) tools For tooling to fit the Hawk Machines & Driver Plates, click on the following pictures.
GRINDING / COATING REMOVAL			POLISHING
Metal Diamonds - HTC Tooling -	Coating Removal - HTC Tooling -	Carbide Scrapers - HTC Tooling -	3" Round Pads - Transitional / Polishing -
Dust Extractors Compact, HD Built, Portable, Low 120 Volt Amp Draw Recommended vacuums, replacement hoses and connectors.
< 421 CFM >	< 258 / 285 CFM >	< 120V, 300 CFM >	< Hoses & Cuffs >