Versatile, Durable, USA Made

• Compact, flexible rubber cone-shape shroud for dust control
• Used for drilling and chiseling concrete, mortar, lead paint and asbestos abatement
• Fits 15 lb Pneumatic and Electric SDS Max Hammers

• Made in the USA of sturdy, abrasive, chemical and UV resistant polyurethane elastomer (1/8" American rubber).

Installation, Description

• Dust Boot slip over the chisel end of 15 lb Pneumatic or Electric SDS Max Hammers

• Position the vacuum port opening to the side of the hammer

• Tighten the hose clamp (included) to secure the dust boot to the hammer

• Recommended vacuum / dust extractor attachments:

  • Reduction Adapter, #RA1512S | 119219 - inserts into the boot's dust port and secure by tightening the included screw clamp

  • Hose Cuff - fits onto the Reduction Adapter (ref. photo, right)

    • D1515S - accepts a 1-1/2" hose

    • D2015S - accepts a 2" hose.

Available Vacuum
Hose Cuffs

Attached to 15lb
Pneumatic Hammer

Attached to SDS Max Hammers

Rubber Dust Boot:  #EBCH-1     $xx.xx      

• Fits 15 lb. Pneumatic and SDS Max Electric Hammers
• Dimensions:  2-7/8" ID Opening x 8-3/4" OAL, 1-1/4" ID vacuum port opening.

Extension Tube --- for use when using longer chisels over 14".

Optimum Dust Control - obtained when 2" - 3" of the chisel extends beyond the boot or extension tube

$xx.xx             #EBCH-1TUB.  Chisel Extension Tube, 10" 

Hose Cuff:  Reduction Adaptor

$xx.xx             #119219     Reduction Adaptor, 1-1/2" OD x Taper Port

• 1-1/2" OD end accepts one of the following hose cuffs (for 1-1/2" or 2" hose)
• Taper end inserts into the exhaust port of the Dust Boot

Hose Cuff:  Hose to Reduction Adaptor

$  x.xx            #D1515S     1-1/2" (F) Thread x 1-1/2" ID (M) Smooth

• Thread-end accepts 1-1/2" vacuum hose
• Smooth-end fits the Reduction Adapter, #119219

$xx.xx            #D2015S     2" (F) Thread x 1-1/2" ID (M) Smooth

• Thread-end accepts 2" vacuum hose
• Smooth-end fits the Reduction Adapter, #119219.