COMBO PACKAGES
Free Grinders, Guard Combos
SELF-CLEAN
Vac Bag

USA Dust Guard - Dust Control Equipment & Supplies.

HEPA Pro Vacuums / Dust Extractors
CERTIFIED HEPA VACS
OSHA SILICA DUST COMPLIANT

120V, CFM MAX
 300/450-CFM    421-CFM 
DUST CONTROL
Combo's:  Dust Pro 6 with Angle Grinders. Free Grinders with Blade Purchase Fein High Efficiency / WD Vac, 153 CFM, 9.3 Gallon
Universal Fit
Universal Vac Bag - Superior dust containment, collection yields, durability.
"Air Pulse"
300 / 450 CFM Dust Extractor, 120v HEPA Pro 421-CFM Vacs. Dust Control Fans
15,663 CFM

Diamonds Dust Guards  Safety   Saws  Sealant
Removal
Surface Prep
Dust Control
Grinders, Tooling
Vacuums
Accessories

Joint
Sealant
Cut-Out
Blades > > >

Joint Sealant Cut-Out Blades


SHOP BY PRODUCT
(Alpha Order)

ABRASIVES

ZEK DISCS
WIRE WHEELS
METAL POLISHING
SEALANT CUT-OUT


AIR SCRUBBERS

VENTILATORS

ANCHORS, EPOXY
MASONRY
MADE TO PRINT
STRUT, FITTINGS


CARBIDE, CHISELS

DUST CONTROL
CUSTOM LENGTHS


DIAMONDS
- - FREE GRINDERS

DESIGN & BUILD

METAL FABRICATION


DUST FANS

VENTILATION
CONTAINMENT


ENCLOSURE

RAM BOARD, TAPE
PLASTIC SHEETING


FLOOR GRINDERS

GRIND / POLISH
COATING REMOVAL

GANG BOXES

GENERATORS
INVERTERS


LADDERS

PRESSURE
WASHERS

RECOVERY


SLURRY
VACUUMS
PRESS MACHINES

SURFACE PREP
FLOOR GRINDERS
DIAMOND TOOLING

VACUUMS
WET / DRY
EXTRACTORS
ACCESSORIES


 

Surface Prep Vacuums   >   DePureco - Vacuum Accessories
 

DePureco Industrial Vacuums.

Accessories & Replacements
Industrial Vacuums

 sssss

 

Pre-Separators

Unlock the full potential of your industrial vacuum with a pre-separator by its side.  By adding a pre-separator to your set-up, you're not only boosting capacity but also safeguarding your vacuum's filter, extending its lifespan.  Together, the tackle even the toughest tasks, effortlessly handling a wider range of materials.  With a separator paired with your vacuum, it's a solution tailored to solved any cleaning challenge with ease.

Depureco 15-Gallon Bin Separator

#P13821

15-Gallon, Bin Separator, HD 14-Gauge Metal, 2" OD Dust Ports.  4" rubber, swivel castersFor up to 260 CFM.

$880.00        

 

Depureco Longopac Separator

#P12372

Longopac Separator, HD, 12-Gauge Metal, 2" OD Dust Ports.  4" rubber, swivel castersFor up to 380 CFM.

$1,790.00        

 sssss
Motors

2-Stage By-Pass 1000 Watt Motor

#P09065/U

AMETEK 115V, 60Hz, 1000 Watt By-Pass Motor.  Single-phase, high performance, designed for non-continuous use.  Each motor is managed by an independent switch, powerful and highly reliable, long lasting life, up to 1300 hours.  Fits DePureco 2-Motor Dust Extractor, #XM35 JC LP.

$229.00     

2-Stage By-Pass 800 Watt Motor

#P09060/U

AMETEK 115V, 60Hz, 800 Watt By-Pass Motor.  Single-phase, high performance, designed for non-continuous use.  Each motor is managed by an independent switch, powerful and highly reliable, long lasting life, up to 1300 hours.  Fits DePureco 3-Motor Dust Extractor, #XM100 JC LP.

$209.00       

ssssss

Pre-Filters

Conical Pre-Filter, XM 35 H13

 

#P12832 

Conical-Shaped, Pleated Cartridge Filter.  Wet/Dry, Polyester Filter for Dust Category M.  Filtration efficiency down to 1 micron. Antistatic media available.  Fits DePureco 2-Motor Dust Extractor, #XM35 JC LP.

$349.00       

 

Star-Shaped, Polyester Pre-Filter - Fits Depureco 3-Motor Dust Extractors.

#P11718 

Star-Shaped, Wet/Dry, Polyester Filter for Dust Category M.  Filtration efficiency down to 1 micron. Antistatic media available.  Fits DePureco 3-Motor Dust Extractor, #XM100 JC LP.

$299.00       

Star-Shaped, Polyester Pre-Filter w Teflon Coating for very sticky materials.

#P11719 

Identical to the above filter (Star-Shaped, Wet/Dry, Polyester Filter for Dust Category M) but with Teflon coating.  Particular suitable for very sticky materials (i.e. terrazzo dust.)  Fits DePureco 3-Motor Dust Extractor, #XM100 JC LP.

$469.00       

ssssss

HEPA Filters
HEPA Filter, H14 - fits 2-Motor Depureco. #P12279 

H14, high-efficiency cartridge filter for fine dust, certified HEPA, rated at:  99.995% at 0.18 micronFits DePureco 2-Motor Dust Extractor, #XM35 JC LP.

$356.00       

HEPA Filter, H14 - Fits 3-Motor Depureco

#P09868 

H14, high-efficiency cartridge filter for fine dust, certified HEPA, rated at:  99.995% at 0.18 micronFits DePureco 2-Motor Dust Extractor, #XM100 JC LP.

$439.00       

 

 

 

USA Dust Guard
  Div. of Scott Electric
--- Trusted Since 1946!
24 39th Street
(Lawrenceville, Strip District)
Pittsburgh, PA  15201

Open
Monday - Friday,  6:30 AM - 6:00 PM EST

Phone (Direct)
 
412 - 605 - 2992

DISTRIBUTORS WANTED
ABOUT US

SHIPPING, WARRANTY
RETURNS POLICY

TERMS & CONDITIONS

CREDIT APPLICATION

LOCATIONS  |  CONTACTS

PRODUCT LINE CARD