Kut Rite 7" Standup Edger - Concrete grinding, Made in USA.

KutRite Logo. Engineered in Detroit. Made in America.

Manufacturing Surface Preparation Equipment since 1947 ---
Listening and providing real world solutions. Aspiring to Detroit's "can-do" spirit.

Kut-Rite Logo.

Edge Kutter 7" Grinder / Polisher

"Zero" edging along a wall with the feel and control as being on your knees!

EDGE KUTTER 7"

• Working width: 7"
• Edging: 1/8" From the wall
• Tooling: 7" Cup Wheels, Resin Polishing Pads
• RPM: 6000 (grinder), 1750 (polisher)
• Power: 15 Amp, 120 Volt Motor
• Dimensions: 29.0"L x 18.5"W x 41"H
• Weight: 60 lbs (grinder), 55 lbs. (polisher)
• Diamond Tooling: 7" Cup Wheels, Resin Polishing Pads
• Compact, Portable - Specifically designed to address the edging needs of the concrete floor polishing and preparation market
• Warranty: 2 Years, Labor & Parts.

$2,195.00
EDGEKutter, 7KG - 7" Edge Grinder w/ 7" Cup Wheel, 120 volt, 15.0 FLA (Full Load Amperage Draw), 6000 RPM

$2,495.00
EDGEKutter, 7KP - 7" Edge Polisher w/ a Full Set of Polishing Rings (for Velcro Polishing Pads) , 120 volt, 15.0 FLA, 0 - 1750 RPM

Built from the ground up by Kut-Rite Manufacturing to satisfy the edging problems and finish a quality job. Specifically designed to address: How do get close enough to the wall? To match the appearance of the edge with the rest of the floor. How to eliminate working on your hands and knees. And how to control the dust?

Benefits

Agile enough to so you can feel and control the edging operation as effectively as if you were down on the floor with a hand grinder
Tee-handle is ergonomically designed to use the machine from either side and can be adjusted in height for any operator’s comfort
Throttle-style grip that controls the pitch of the attached grinder/polisher, giving you the same control that you would have with a hand grinder but in an upright position
The EDGEKutter's rocker pivot suspension at the rear axle helps the machine maneuver over undulations in the floor, achieving the same flatness on the edges that are obtained by the larger grinder/polisher in the central floor area
When powered up, the EDGEKutter™ floats in any direction and turns on a dime, guided by two non-marking swivel casters
The complete grinder and guidance mechanism is tucked away safely under the machine’s cover, avoiding the feet of the operator during maneuvering
The EDGEKutter easily adapts to most brands of hand grinder or polisher and comes equipped with a state-of-the-art shroud and rubber dust seal with a front hook/loop-fastened flap that can be pulled off for extremely close edging
A vacuum hose mounts to the shroud’s dust port and passes through a bracket/draw-latch assembly that keeps it (and the power cord) from getting in the way of the work
While the EDGEKutter focuses on the edges of the floor, it is accurate enough to make touchups in field areas
In terms of safety, efficiency, accuracy and eliminating worker fatigue, this machine pays for itself many times over. The EDGEKutter™ grinder weighs 60 pounds; the polisher 55.

Covers more square feet in less time using less effort and with perfect blending. Ergonomically designed for grinding, polishing concrete, terrazzo, stone, removing paint, thin set, adhesives, VCT, mastic and epoxy floor coatings. The Edge Kutter's dust shroud achieves "zero" edging from three sides and the front two corners are angle to provide edging around odd shapes. Various wheels are offered to remove epoxy coatings, prepping for a new application, and polishing rings for polishing concrete, stone and terrazzo.

Kut-Rite Grinders - Made in the USA. Conquer Grinders - 100% American Made and backed by a Full 2-Year Parts and Labor Warranty.

Additional Features & Benefits

The following unique features offer the operator what is needed when using a standup tool, providing better quality and engineering for fewer delays and lower labor costs. And all designed and American Made in the Motor City.

Rocker Pivot Suspension - The Edge Kutter floats over the surface gracefully creating a consistent scratch pattern in the surface. The Rocker Pivot Suspension enables the Edge Kutter to maneuver over undulations in the floor while maintaining flat and even contact between the diamond wheel and the surface.

Tension Throttle Handle - Edge Kutter.

Tension Throttle - Adding superior control is the unique spring loaded tension throttle that lifts the handle of the angle grinder / polish to provide the control and free required to grind, polish or sand.

COST OF EDGING? What's the real cost of preparing a floor?

Of using a traditional hand grinder? Removing a Coating? Polishing a Concrete Floor?

Traditional ... edging with a hand grinder. Edging is 45% of the labor!
--- If you're a one man operation that's half your time on your knees!

Not to mention that someone is hurting their back and knees
When polishing a concrete floor, edging is necessary at EVERY STEP - for every type of diamond and every grit ...

More News: Hand grinders with a diamond cup wheel produces a different scratch pattern than a planetary grinder and its diamonds, which further increases time for proper blending.

Depending on the job ... edging can increase labor to over 60%!

With the Kut-Rite Edge Kutter:

You're in stand-up mode all the time
Your producing the same scratch pattern (uses the same trapezoid diamonds)
One tool to grind, polish and remove coatings, all within 1/8" of the wall!

Stand-up Mode Reduces Labor Costs 30% - 60% vs. being on your knees.

EDGEKutter™ Accessories, Related Products All are Interchangeable, developed "as one." A custom fit for every product.

Resin Polishing Rings Flexible Metal Rings Ceramic Wheels	PCD Coating Removal & Diamond Cup Wheels	EDGEKutter Accessories Dust Skirt, 5/8-11 Adapter, etc.	Dust Extractors Automatic Self-Cleaning
< Click on each of the above for information, pricing, ordering >