Diamond Impregnated Floor Pads - Longest Lasting + Best Performance Pads.

Impregnated Diamond 412 Pads with both diamond and Ferron.

Use the 412 Diamond Pads as you would a normal scrub or polishing pad. With normal use, periodic restoration, waxing and re-finishing are seriously reduced if not eliminated.

Use wet or dry on a high speed buffer, automatic scrubber, traditional swing machine, etc.

No Chemicals, Waxes, Sealers, Strippers, Etc. Once the floor is restored, 412 Pads are the maintenance solution to make use to be sure that the floor will not lose its sheen again. With a Spinor DIP every time you clean, buff and scrub (with or without water) you'll also be increasing the floor's shine --- that's the way it works!

Comparison between using a 412 and a HTC Twister Pad.

412 vs. HTC Pad - Spinor Pads are the only impregnated floor pad that contains both diamonds and Ferron® - the only substance that can scratch a diamond. From 100 to 8000 grit, Spinor Pads provide exceptional performance and durability. Outperforming & outlasting ALL other Diamond Impregnated Pads 3:1

4-Step Maintenance System

Typically the Step 1 Pad - Red for a deep cleaning
Establishes a good starting point for the restoration process
Mildly aggressive, medium coarse
For damaged floors or use after grinding
HD removal of scratches & discoloration
Leaves a satin or matt finish
Removes light to medium scratches, etch and deep soil wear marks
Used to remove standard floor coatings – no stripping chemicals are required:

Coarse (#400 Grit) Red

When using an auto scrubber turn the water to medium flow, set maximum down pressure on the heads, work in a systematic way. Only cover an area you can easily control and vacuum residue as you go. To remove scratches run red pad over the surface 4-6 times in succession then check to see if the damages are removed before continuing or moving to Step 2.

Typically the Step 2 Pad - Blue in re-surfacing a natural stone or concrete floor, typically used after the Coarse (#400) Red Pad
Cleans the surface
Removes small scratches
Leaves a slightly reflective finish
Provides deep cleaning and produces an economical light reflective finish, most popular in large industrial and commercial applications.

Medium (#800 Grit) Blue

Used as a deep cleaning pad and to remove light scratches or repair lightly worn surfaces. Follow the same procedure as Step 1, above. The blue pad is best used wet. The blue pad also prepares the floor for the next step in polishing. Make 4-6 passes over the floor covering the exact same area as completed with the Red Pad in Step 1 then check the surface before continuing or moving to Step 3. Look for an even honed scratch free finish when this stage is completed.

Step 3 Pad - Yellow for maintained floors
Cleans & prepares floor for high polish
Removes fine scratches
Conditions stone & concrete floors for final polishing
Can be used as a regular maintenance pad.

Fine (#1500 Grit) Yellow

Intended for both daily cleaning and polishing, producing a clear reflective shine.

All floors types and finishes
A+ Maintenance Pad
Regular finishing / Daily for High Gloss.

This pad actually starts the polishing process. Follow the same procedure as in Step 2, covering the exact same areas. Look for a silky luster to the surface when this stage is completed. If you are using the green pad every day and the floor is in good condition but is losing some of its luster, use the yellow pad for one day to “Snap Back” the floor. After one day of use, switch to the Green Pad and use it every day to maintain the floor.

Step 4 Pad - Green Very Fine Pad
Finishes off the 4-Step Process
A+ to use as a normal daily maintenance pad
Produces & maintains a Wet Look shine
Can be used on: Concrete, Stone, Terrazzo, Tile & VCT
Finishes off the four step process leaving a polish sheen with the highest shine available
Daily use will maintain and improve the polish shine.

Very Fine (#3000 Grit) Green

The final polishing pad: Used as part of a light restoration - Make 5 passes over the floor, covering the exact same area as completed with the pads in Steps 1, 2 and 3. The best polish will be achieved if this pad is used dry with the maximum head speed and pressure that can be achieved with your machine. When used everyday wet or dry the green pad will clean and maintain the floor while producing the highest possible shine.

412 Diamond Pads - Pricing / Ordering
		4-Step - Floor Maintenance System				Specialty Pads *
Size	Unit Price	GRIT 400	GRIT 800	GRIT 1500	GRIT 3000	GRIT 100	GRIT 200	GRIT 8000
7"	$19.00	7SMP0400	7SMP0800	7SMP1500	7SMP3000	7SMP0100	7SMP0200	7SMP8000
9"	$26.00	9SMP0400	9SMP0800	9SMP1500	9SMP3000	9SMP0100	9SMP0200	9SMP8000
11"	$29.00	11SMP0400	11SMP0800	11SMP1500	11SMP3000	11SMP0100	11SMP0200	11SMP8000
13"	$32.00	13SMP0400	13SMP0800	13SMP1500	13SMP3000	13SMP0100	13SMP0200	13SMP8000
14"	$39.00	14SMP0400	14SMP0800	14SMP1500	14SMP3000	14SMP0100	14SMP0200	14SMP8000
15"	$43.00	15SMP0400	15SMP0800	15SMP1500	15SMP3000	15SMP0100	15SMP0200	15SMP8000
16"	$46.00	16SMP0400	16SMP0800	16SMP1500	16SMP3000	16SMP0100	16SMP0200	16SMP8000
17"	$48.00	17SMP0400	17SMP0800	17SMP1500	17SMP3000	17SMP0100	17SMP0200	17SMP8000
18"	$48.00	18SMP0400	18SMP0800	18SMP1500	18SMP3000	18SMP0100	18SMP0200	18SMP8000
20"	$52.00	20SMP0400	20SMP0800	20SMP1500	20SMP3000	20SMP0100	20SMP0200	20SMP8000
21"	$54.00	21SMP0400	21SMP0800	21SMP1500	21SMP3000	21SMP0100	21SMP0200	21SMP8000
24"	$79.00	24SMP0400	24SMP0800	24SMP1500	24SMP3000	24SMP0100	24SMP0200	24SMP8000
27"	$92.00	27SMP0400	27SMP0800	27SMP1500	27SMP3000	27SMP0100	27SMP0200	27SMP8000

Most aggressive or extra coarse
For damaged floors or used after grinding
HD removal of scratches & discoloration
Deep surface renovation, for use on a very bad floor.

412 Diamond Pad - #100 Black.

#100 Grit - Black

Very aggressive, coarse grit
For damaged floors or use after grinding
HD removal of scratches & discoloration

412 Diamond Pad - #200 Orange.

#200 Grit - Orange

Optional and Finishing Pad -
Will make the floor's shine "pop"
Produces & maintains a wet shine look
Can be used on: Concrete, Stone, Terrazzo, Tile & VCT*

412 Diamond Pad - #8000 Tan.

#8000 Grit - Tan

Designed for dry use but is commonly used wet. Adjust the pad speed and down pressure to the maximum that your machine can achieve. When used everyday wet or dry the tan pad will clean and maintain the floor while producing the highest sheen possible.