Stripsol LO
Non-Hazardous Stripping Agent

• Solvent-based sealer, stain, and paint stripper with a wide range of applications

• Remove layers of acrylics, acrylic latexes, polyurethane and other resin coatings

• The product’s low odor allows it to be used indoors and out

• Will do little to no damage on most substrates including:  wood, glass, metals, aluminum trim, and masonry surfaces.

Specifications:

• Coverage:

  • Use undiluted (straight)

  • Coverage varies from 125-250 sq. ft. per gallon depending on the surface porosity, texture and severity of staining

• Application:  best applied with low-pressure spray but it can be brushed, wiped, or rolled-on

• After adequate soak time, remove the paint with a pressure washer, garden hose or water and scrub brush for rinse

• How To Use / Prod Specs

Size:  5-Gallon Pail

Description

Low-pressure stripping agent to remove paint and adhesives from multiple surfaces.  Because of this product’s unique low odor chemistry, it can be used both indoors and outdoors.  Penetrates fast for effective removal of paint and adhesives

Application Process:  Stripsol LO is best applied through a low pressure application system, but can be brushed, wiped, or rolled onto the surface.  Depending on the paint or coating to be removed, more than one coat may be needed.  Apply the stripper from top down using a side to side spray.  A small hand pump garden sprayer works very well for small jobs.

Allow Stripsol LO to sit on the surface for at least five minutes before doing a scratch test.  When you are doing the scratch test and you see the substrate everywhere you scratched, you are ready to rinse.  If you do not see the surface or the coating is gummy, reapply the product and wait an additional 10 minutes before re-testing.

Pay careful attention to sheltered areas under overhangs or railings, as these areas see less harmful weathering and fading and therefore may need repeated applications.  Rinsing may be done with a pressure washer, garden hose, or water and scrub brush.

Benefits:

• Low odor

• Can be used indoors

• Penetrates quickly

Surfaces Safely Used On:

• Concrete

• Decks

• Wood

• Masonry

• Brick

• Metal

Removes:

• Adhesives

• Paint.

Stripping Power of Stripsol LO

Concrete			Concrete
Oil Stains			Oil Stains