Products for Concrete & Masonry Restoration

USA Dust Guard - Dust Control Equipment & Supplies.
Div of Scott Electric -- Trusted Since 1946!

Restoration Kits

Metabo Angle Grinders

Dewalt Angle Grinders

Diamond Package - Free Tools & Shipping.

  Diamond Combo  
Grinder & Guard

Unique & Custom Designed Products

Catalog - product brochures w/ pricing.

Single Brick Removal
Thin Mortar Joints
Glitter Bits & 3" Diamond Blades

Head Joint Grinding
90° Corner Cuts

SILICA DUST
Control & Containment
Safety Equipment
SURFACE PREP
DIAMONDS
GRINDERS
 

VACUUMS, FILTERS
VENTILATORS
DUST SOCKS
DUST GUARDS, PAPR's

 

better built
USA Engineered
experience counts
production focused

ANCHORS
  EPOXY  
HELICAL TIES
DIAMONDS DUST CONTROL POWER TOOLS SAFETY SAWS SEALANT
REMOVAL
SURFACE PREP VACS_ |_ FILTERS


SHOP BY PRODUCT
(Alpha Order)

ABRASIVES

CUT-OFF

ZEK DISCS
WIRE WHEELS

COATING REMOVAL

AIR SCRUBBERS

DUST SOCKS
VENTILATORS


ANCHORS

CUSTOM
STRUT & FITTINGS
HELICAL - MASONRY

EPOXY, MECHANICAL

CARBIDE BITS

CHISELS
SCRAPERS
XL LENGTHS


COMPRESSORS

SLURRY PRESS


CUTOUT
SEALANT
BLADES, DISCS
COATING REMOVAL


DIAMONDS

DUST CONTROL
SHROUDS
DUST SOCKS
POWER BLOWERS


ENGINES
GAS

EXTENSION CORDS
EXTREME WEATHER
YOUR NAME CORDS

FILTERS
CARTRIDGES
VACUUM BAGS

GANG BOXES
JOBOX
KNAACK


GENERATORS
INVERTERS

HEATERS

PROPANE
KEROSENE


LADDERS


MIXERS
PADDLES
MIXING STATIONS
TRANSPORT CARTS

PLASTIC
SHEETING - POLY
REINFORCED
CLEAR, WHITE
MARKING PAINT

PRESS WASHERS

WATER RECYCLING


SAFETY 

SAWS
CUT-OFF
WALK-BEHIND
MASONRY, TILE


SHOVELS
BROOMS
WHEEL BARROWS


SLURRY
VACUUMS

SLURRY PRESS

SURFACE PREP
MIXERS, SCARIFIERS
TRANSPORT CARTS
GRINDERS, DIAMONDS

VACUUMS
SILICA DUST
ACCESSORIES 
SLURRY, PUMP-OUT


VENTILATORS

AIR SCRUBBERS
POWER BLOWERS


WATER HOSE




 

Vacuum Accessories   >   Hose Cuffs, Couplers & Adapters.
 
 
USA Dust Guard - "Where the Pros shop" Connectors, Adapters, Couplers

Universal Fit - Hose to Vacuum Port on Dust Shrouds

 
 
 

Connectors - for Hoses & Dust Shrouds

Eliminate Proprietary Connection Cuffs
Improve CFM, Increase Production

With our Simple & Universal
Screw-On Hose Cuffs

 

 
Universal Connectors
See Sizes, Pricing - Below
Y-Port:  Dual Vac or 2-Dust Shroud Connection.

Y-Port:  Dual Vac or 2-Dust Shroud Connection.

Thread-End x Smooth-End, Soft Vinyl Hose Cuffs. Perfect Fit - hose cuffs and replacement hoses.

Connectors - Universal Fit

Screw-On  - x -  Smooth, Friction Fit

Universal System - Eliminate
Proprietary Connection Problems

—  Soft Vinyl, High Quality Connectors  —
USA Made DDM-CONCUT Diamonds.

 

Connections Made Easy
Select a Connector by Hose Size Miscellaneous Connectors Dust Shroud
Connectors
Assortment
Pack
2" 1-12" 1-1/4"
1-3/8"
Coupler Adapters Y-Port Cross
Reference
Hose Size
of Vacuum
--- Metabo, USA Dust Guard Bosch, Fein, Dewalt, Hilti

 

 

 Assortment Pack

Screw Cuffs & Adapter - 11 Pcs.
  • Assortment of our most common connectors
  • Threads onto 1-1/4", 1-3/8", 1-1/2" and 2" hoses
  • Includes inlet ports for vacs, the most common connectors and our universal "fit-all" adapter.
 

Assorted Screw Cuffs - thread-on x smooth interior.

Reduction Adapter for Dust Shrouds.

    

Hose Cuff Assortment Pack
11 Pc Pack

Fits 1-1/4", 1-3/8", 1.5", 2" hoses, vacuum inlet ports, dust shrouds, includes universal adaptor.

  • (1) #201751 | D1512S — threads onto 1.5" hose x 1.25" ID Smooth-End ~ attaches to dust shrouds with 1.25" OD including our “blue” HD cup wheel shrouds, Dewalt’s tuck pointing and surface grinding cup wheel shrouds

  • (1) #168896 | D1515S — threads onto 1.5" hose x 1.5" ID Smooth-End ~ attaches to dust shrouds with 1.5" OD including Bosch tuck point shroud & Metabo ‘clip-on’ tuck shroud. Also used as the inlet cuff for Dewalt DW012 vac, to enable it to use a 1.5" hose for increased CFM

  • (2) #194324 | D1520S — threads onto 1.5" hose x 2.0" ID Smooth-End ~ the most widely used cuff. Attaches to tuck point guards with 2" OD including USA Dust Guard, Dust Director and Metabo

  • (1) #201751 | D1212S — threads onto 1-1/4" hose x 1.25" ID Smooth-End ~ attaches to dust shrouds with 1.25" OD including our “blue” HD cup wheel shrouds, Dewalt’s tuck pointing and surface grinding cup wheel shrouds

  • (1) #201064 | D1215S — threads onto 1-1/4" hose x 1.5" ID Smooth-End ~ attaches to dust shrouds with 1.5" OD including all Bosch tuck pointing shrouds

  • (1) #109015 | D1220S — threads onto 1-1/4" & 1-3/8" hose x 2.0" ID Smooth-End ~ attaches to dust shrouds with 2.0 OD including USA Dust Guard, Dust Director and Metabo

  • (2) D2020S | 298665 — threads onto 2" hose x 2" ID Smooth-End ~ attaches to dust shrouds with 2" OD. This same cuff fits into the inlet port of most vacuums to enable use of 2" hose which increases CFM

  • (1) D2015S | 226652 — threads onto 2" hose x 1.5" ID Smooth-End ~ attaches to dust shrouds with 1.5" OD including Bosch tuck point & cup wheel shrouds

  • (1) #119221 | Universal Adapter — 1.5" OD x Taper End. Taper end + unique material securely installs and hold itself into most dust ports including European, Asian, Hilti, Dewalt. 1.5" OD accepts any 1.5" ID Smooth-End Hose Cuff.

 

$ 149.00

#HCVP

 

 

 Screw-On Hose Cuffs

Hose Size:  2" --- Threads on to 2" Hose

 

Thread-End x Smooth-End, Soft Vinyl Hose Cuffs.

 

#D2020S | 298665 2" ID Smooth-End $ 12.00
#D2020S - 2" ID Smooth-End
  • Attaches to dust shrouds with 2" OD including tuck point guards from USA Dust Guard, Dust Director®, Metabo
  • This same cuff fits into the inlet port of most vacuums, uses a 2" hose.  By using a 2" hose, CFM increases.  D2020S replaces 1-1/4", 1-3/8" and 1-1/2" diameter hoses. 
 
#D2020SS 2" ID Smooth-End $ 18.00

#D2020SS - SWIVEL CUFF - 2" ID Smooth-End

  • Identical to the above D2020S but with 360° swivel feature for easier maneuvering of the hose and dust shroud.

 
#D2015S | 226652 1.5" ID Smooth-End $ 19.00

#D2015S - 1.5" ID Smooth-End

  • Attaches to dust shrouds with 1.5" OD including all Bosch tuck point and cup wheel shrouds.

 

 Screw-On Hose Cuffs

Hose Size:  1-1/2" --- Threads on to 1.5" Hose
  • The following Vacs use 1-1/2" Hose:  Metabo, USA Dust Guard
 

Assorted Screw Cuffs - thread-on x smooth interior.

#D1512S | 201751 1.25" ID Smooth-End $ 13.00
#D1512S --- 1.25" ID Smooth-End
  • attaches to dust shrouds with 1.25" OD including our “blue” HD cup wheel shrouds and Dewalt’s tuck pointing and surface grinding cup wheel shrouds
 
#D1515S | 168896  1.5" ID Smooth-End $ 9.00
#D1515S --- 1.5" ID Smooth-End
  • attaches to dust shrouds with 1.5" OD including Bosch tuck point shroud & Metabo ‘clip-on’ tuck shroud
  • Also used as inlet cuff for Dewalt DW012 vac to use a 1.5" hose.
 
#D1520S | 184324 2" ID Smooth-End $12.00
#D1520S --- 2" ID Smooth-End
  • used with tuck point guards with 2" OD including USA Dust Guard, Dust Director®, Metabo, Soff-Cut 150 Saw.
 
#D1515T | 201055 1.5" ID Threaded-End $11.00
#D1515T --- COUPLER - 1.5" ID Dual Threaded-Ends
  • used with Glitter Bit Dust Controller and to connect [2] 1.5" hoses together.

 

Screw-On Hose Cuffs
Hose Size:  1-1/4"  /  1-3/8"
  • The following cuffs thread onto 1-1/4" / 1-3/8" hose
  • The following vacs use a 1-1/4" / 1-3/8" hose:  Bosch, Dewalt, Fein, Hilti.
 

Assorted Screw Cuffs - thread-on x smooth interior.

#D1212S | 201071 1.25" ID Smooth-End $ 9.00

Attaches to dust shrouds with 1.25" OD dust port including our "blue" HD Shroud for Cup Wheel and Dewalt's Tuck Point and Cup Wheel shrouds.

 
#D1215S | 201064 1.5" ID Smooth-End $ 13.00

Attaches to dust shrouds with 1.5" OD dust port including all Bosch Tuck Point shrouds.

 
#D1220S | 109015 2" ID Smooth-End $ 19.00

Attaches to dust shrouds with 2.0" OD dust port including our USA Dust Guard's universal 6" Tuck Point Guard and Metabo's.

 

Coupler & Adapters

Coupler

Hose Coupler, joins two hoses together.

2" Outside Diameter
Chrome Plated Steel

#D-HC Hose Connector $ 23.00
  • Joins 2 hoses together including:

    • 1-1/2" to 1-1/2"

    • 2" to 2"

    • 1-1/2" to 2"

  • Ends are 2.0" OD, select the above Connectors with a 2" ID - as follows

    • 2" Hose, select D2020S (2" thread-on x 2" ID smooth)

    • 1-1/2" Hose, select D1520S (1-1/2" thread-on x 2" ID smooth.)

 

Adapters
  #119221 Reducer $ 19.00
Reduction Adapter for Dust Shrouds.

#119221 - Reducer

1.5" OD x Taper-End

  • taper end installs into Hilti’s Tuck Point and most other shrouds including our D1900 Drill Bit Shroud and Hollow Shank Drill Bits

  • the wide end (1.5" OD) accepts any of the above Connectors with a 1.5" ID.

       
  #H32T Enlarger $ 34.00
Transition hose cuff.

#H32T - Enlarger

2" x 3" Transition Cuff

  • used to attach a 1.5" or 2" hose to saws or grinders with a 3" OD dust port

  • 3" end is secured to the outlet with a metal banding clamp (not included)

  • 2" end uses the any of the above Connectors with a 2" ID.

 

Y-Port Connector

Dual Vac or 2-Dust Shroud Connection

Y-Port:  Dual Vac or 2-Dust Shroud Connection.

Y-Port:  Attach (2) 1.5" or 2" Hoses to Create (1) 2" Hose

#D0014 Y-Port (shown left w/o the hose) $ 42.99

Includes:  1.5" pigtails (2) w/ 2" OD hard plastic cuffs (2).  Each leg of the cuff and the hard plastic inlet cuffs accepts the D2020S connector (not included)

#D0016

Y-Port, complete assembly (shown left)

$ 107.99

Includes:  1.5" pigtails (2) w/ 2" OD hard plastic inlet cuffs (2), 2" x 12.5" hose w/ (2) 2" ID smooth connectors #D2020S.

  • Provides two (2) Connection Options

    • Connect 2-vacs to increase CFM

    • Operate 2-dust shrouds from 1-vac

  • Cost-Effective Way to Increase:

    • CFM - connection of two vacs

    • Comply to the OSHA Silica Dust Rule for increased CFM - instead of using larger and more expensive dual-motor or 240 volt dust extractors

  • The two legs of the Y-Port accepts (3) different hose diameters using an appropriate screw cuff:

    • #D1220S - for 1.25" hose

    • #D1520S - for 1.5" hose

    • #D2020S - for 2" hose.

 

 

 

Cross Reference:  Dust Shroud Connections

Match Your Shroud to a Universal Connector - Hose to Dust Shroud Connection

USA Tuck Pointer
Metabo
Dust Director
®
Universal Cup
Wheel Shrouds
Glitter Bit Dust Controller Dewalt Tuck Pointer Bosch Tuck Pointer
USA 6" Dust Control Guard, 4" - 6" blade capacity. 5" and 7" Surface Dust Guards. Glitter Bit Dust Controller. Dewalt tuck point guard. Bosch tuck point guard.
Size:  6" Sizes:  5", 7" USA Dust Guard Size 6" Size 5"
Accepts a 2" ID
Smooth-End Cuff
See 1-1/2" or 2" Hose
Accepts a 1-1/4" ID
Smooth-End Cuff
See 1-1/4", 1-3/8", 1-1/2" Hose
Accepts the 1-1/2" Dual
Threaded Cuff,
#201055
See 1-1/2" Hose
Accepts a 1-1/4" ID
Smooth-End Cuff
See 1-1/4", 1-3/8", 1-1/2" Hose
Accepts a 1-1/2" ID
Smooth-End Cuff
See 1-1/4", 1-3/8", 1-1/2", 2" Hose

 

Bosch Tuck Pointer Cup Wheel Shrouds Tuck Point Guard Rubber Dust Boot
- Drilling & Chisels -
Drilling:
SDS Plus &
Straight Shank Bits
Bosch tuck point guard. Hilti Cup Wheel Dust Shroud. Hilti Tuck Point Guard. Rubber Chipping Hammer Dust Boot. Bosch SDS Dust Control for Concrete Bits.
Size 5" Hilti, sizes:  5", 7" Hilti, size 5" Fits SDS Max Hammers & 15 lb Pneumatic Hammers Fits SDS Plus Rotary Hammers & 3-Jaw Chuck Hammer Drills
(4-3/8" Max. Drilling Depth)
Accepts a 1-1/2" ID
Smooth-End Cuff
See 1-1/4", 1-3/8", 1-1/2", 2" Hose
  • Uses Reduction Adaptor #119221- installs into dust port of the Hilti dust shroud

  • Also requires a 1-1/2" ID Smooth-End Cuff to connect the hose to the Reduction Adaptor #119221.  See 1-1/4", 1-3/8", 1-1/2", 2" Hose.

Accepts a 2" ID
Smooth-End Cuff
See 1-1/4", 1-3/8", 1-1/2", 2" Hose.

 

Hollow Shank
Drill Bits
Universal Cup
Wheel Shrouds
Drill Bit Dust Guard Dewalt SDS Plus for Drill Bits Husqvarna 14" Shoe
Hollow Shank, Dust Control Concrete Bits. Dust Control Shroud for Cup Wheels.
Spring-Cushion
Dust Control Shroud for Drill Bits.
Accepts Types
of Drill Bits
Dewalt Dust Control for Drill Bits.

Maximum Drilling Depth:  4"

Dry Cutting Skid Plate for Husqvarna Electric Cut-Off Saws
All Brands Sizes:  5", 7" Unlimited Drilling Depth, 1-3/8" Max. Bit Diameter  

 

Accepts a 1-1/2" ID
Smooth-End Cuff
See 1-1/4", 1-3/8", 1-1/2", 2" Hose.

 

 

Accepts a 1-1/2" ID
Smooth-End Cuff
See 1-1/4", 1-3/8", 1-1/2", 2" Hose.

  • Uses Reduction Adaptor #119221- installs into dust  port

  • Also requires a 1-1/2" ID Smooth-End Cuff to connect the hose to the Reduction Adaptor #119221.  See 1-1/4", 1-3/8", 1-1/2", 2" Hose.

 
 

Accepts a 1-1/2" ID
Smooth-End Cuff
See 1-1/4", 1-3/8", 1-1/2", 2" Hose.

  • Uses Reduction Adaptor #119221- installs into dust port

  • Also requires a 1-1/2" ID Smooth-End Cuff to connect the hose to the Reduction Adaptor #119221.  See 1-1/4", 1-3/8", 1-1/2", 2" Hose.

 
 
 
 
 

  USA Dust Guard
  Div. of Scott Electric
  24 39th Street
  (Lawrenceville, Strip District)
  Pittsburgh, PA  15201

USA Dust Guard - Products for the Concrete, Masonry & Highway Trades.

--- Div. of Scott Electric ---

ABOUT US

SHIPPING, WARRANTY
RETURNS POLICY

TERMS & CONDITIONS

CREDIT APPLICATION
PRODUCT LINE CARD

LOCATIONS | CONTACTS


Request a Quote
Product Price Request Form

Receive a Quote
on Any Item

  Phone (Direct)
 
412 - 605 - 2992

 

Open
Monday - Friday
  6:30 AM - 6:00 PM EST