Electric Needle Scaler - Compact, 120 Volt ~ delivers the same performance as a pneumatic scaler.

COMBO DISCOUNTS Grinder / Guard / Vac		SELF-CLEAN Vac Bag	CERTIFIED HEPA VACS OSHA SILICA DUST COMPLIANT			Cyclone Vac Revolutionary	421 CFM 120v Vacs	SEALANT CUTOUT
		Universal Fit "Air Pulse"	CERTIFIED HEPA VACS OSHA SILICA DUST COMPLIANT					"Ninja"

Diamonds	Dust Guards	Safety	Saws Dust Control	Sealant Removal	Surface Prep Grinders	Vacuums Accessories	Pearl Vacs Q4 Promotion ->

SHOP BY PRODUCT
(Alpha Order)

ABRASIVES
ZEK DISCS
WIRE WHEELS
METAL POLISHING
SEALANT CUT-OUT

AIR SCRUBBERS
VENTILATORS

ANCHORS, EPOXY
MASONRY
MADE TO PRINT
STRUT, FITTINGS

CARBIDE, CHISELS
DUST CONTROL
CUSTOM LENGTHS

DIAMONDS
- - FREE GRINDERS

DESIGN & BUILD
METAL FABRICATION

ENCLOSURE
RAM BOARD, TAPE
PLASTIC SHEETING

FANS
VENTILATION
CONTAINMENT

FLOOR GRINDERS
GRIND / POLISH
COATING REMOVAL

GANG BOXES

GENERATORS
INVERTERS

LADDERS

PRESSURE
WASHERS
RECOVERY

SLURRY
VACUUMS
PRESS MACHINES

SURFACE PREP
FLOOR GRINDERS
DIAMOND TOOLING

VACUUMS
WET / DRY
EXTRACTORS
ACCESSORIES

Surface Prep > Power Tools > Electric Needle Scaler

Electric Needle Scaler

Rust, Corrosion, Grime, Paint, Scale Removal

Electric Needle Scaler
Model #VL219ES

$xxx.xx

Electric Needle Scaler, 120 Volt

Fastest, most effective method to break through rust, grime, coatings, corrosion, concrete, mortar and other accumulated materials from iron, thin metals, concrete, masonry, etc.

* For pricing, please call or request a quote by entering a quantity. The item is placed in the shopping card and labeled, "Quote Request." Within the business day you'll receive the quote.

Needle Holder
holds 19 Needles

Paint & Coating Removal from Iron, Steel, Thin

Mortar Removal

Scraping Iron & Rebar Rods from Concrete

Description:

Choice of needle tip selection to leave light surface markings or a roughen surface when desired
DESIGN -
- Built with uncompromising, heavy-duty quality to survive the harshest environments
- Lightweight, Compact, 7.8 amp - delivers the same performance as a pneumatic scaler
- Optional chisel holder and dust shroud available - easy to convert, needles to chisels.
SAFETY -
- Designed for extended operating times with reduced vibration levels 8 times lower than the industry standard
- To further help protect the user from injury the tool is fitted with a dead man’s switch to ensure the motor has “zero volt and thermal overload protection”

Corrosion Removal

Video Clips (2)

.21 seconds

1.11 seconds

TECHNICAL DATA				One set of chisel tipped needles included (19 needles.)
Model	Voltage	Amps	Watts	Weight (lbs.)	Blows (BPM)	Noise Level (dbA)	Dimensions (inches)	Vibration
VL219ES	120v, 50/60 Hz	7.8	850	8.7	2000	101.8	22"(l) x 3.2"(w) x 10.2" (h)	6.5

asd

Accessories

Needles & Chisels

Item	Part No	Description	Price
Chisel Attachment (Req. 2 Parts)	419.2003	Chisel Holder	$xxx.xx
Chisel Attachment (Req. 2 Parts)	610.2003	Anvil	$xxx.xx
asdf
Dust Control Shroud	418.2003	Dust Shroud, 1-1/2" OD Vacuum Port	$xxx.xx

NEEDLES - 3mm (0.12") x 7"
Needle Tip	Part No	Description Package	Price / Package
Chisel Tip	Chisel tipped needles will clean the surface as effective as a pointed tip but will leave light surface markings.
	413.2119	6 Sets of 19 Needles	$xxx.xx

asdf
Pointed Tip	Sharpened to a conical point. Most effective in breaking through very hard scale on materials where some surface indentation is permissible - or where a roughening of the surface is actually desirable.
	413.3119	6 Sets of 19 Needles	$xxx.xx

asdf
Flat Tip	Flat-tipped needles will reduce marking on metal surfaces and can give a polishing effect. For use on thin gauge metals and any surface where a light treatment is required.
	413.1119	6 Sets of 19 Needles	$xxx.xx

CHISELS
Chisel Tip	Part No	Application Width x Length	Price / Ea
Square Cranked End	Weld flux and thick coating removal.
	704.3205	3/8" x 7"	$xxx.xx
asdf
Flat End	Weld splatter removal. Scaling, chipping, chiseling, grooving of concrete / mortar.
	704.3101	3/4" x 7"	$xxx.xx

Flat End	Wide flat chisel for the removal of rust, paint, coatings, tile, thinset.
	704.3103	2-1/2" x 7"	$xxx.xx
asdf
Flat End	Flat chisel for weld splatter, sand cast cleaning, scaling, chipping, chiseling, grooving of concrete / mortar.
	704.3103	3/4" x 10"	$xxx.xx

USA Dust Guard
Div. of Scott Electric
--- Trusted Since 1946!
24 39th Street
(Lawrenceville, Strip District)
Pittsburgh, PA 15201

Open
Monday - Friday, 6:30 AM - 6:00 PM EST

Phone (Direct)
412 - 605 - 2992

DISTRIBUTORS WANTED
ABOUT US

SHIPPING, WARRANTY
RETURNS POLICY

TERMS & CONDITIONS

CREDIT APPLICATION

LOCATIONS | CONTACTS

PRODUCT LINE CARD