Diamond Products CV258C
HEPA Dust Extractor

$xx.xx       

#CV258C HEPA Dust Extractor, 120 volt 2-Motor, 9.2 Amp x 2
Automatic Self-Cleaning, 258 CFM, 110" H20, 15 Gal Drum 

Automatic & Continuous Filter Cleaning -----

• No Reverse Pulse, Air Purging, External Equipment
• No Manual Levers to Lift
• No Solenoid Switches to Replace.

Diamond Products CV258B
HEPA Dust Extractor

$xx.xx       

#CV258B - identical specs as the above vacuum but with the external bag collection system

Both Models:

• Full 1-Year Warranty
• Factory Service, All Parts In Stock.

$xx.xx       
Longopac Replacement Bags, 4 Count Box, #184621
Fits all Dust Extractors with LongoPac Dispenser, makes 25 - 30 bags (approx. 30 lbs. of dust).

Specifications - both models:

•  120 Volt, 2-Motors, 9.2 Amp / Motor
•  Two (2) on/off motor switches
•   258 CFM, 110" H20
•  Includes 2" x 37' hose
•  Automatic Spin Clean Filtration
•  34 Sq Ft Primary Filter
•  9 Sq Ft HEPA Filter
•  Large rear wheels
    Swivel locking front casters
•  1 Year Labor & Parts Warranty.

Easy to Use:  Turn it On, Let it Work
--- Automatic & Continuous Filter Cleaning

Automatic Spin Clean Filtering

• Constantly Revolving Flapper - inside the filter prevents dry and sticky powders from accumulating on the filter’s surface --- a must for 'sticky' terrazzo dust

• Steel Reinforced Filter Pleats - structurally woven, steel-fiber re-enforced pleats are constantly flexed, expanded and popped to prevent debris from accumulating inside the filter's pleats

• Dust and Water Shredding PTFE Membrane - further enhances the filter’s efficiency rating, dust release ability, prevention of surface blinding, it also increases the filter’s life

• End Result:  Maximum suction power is maintained, no manually filter cleaning required ~ Guaranteed!

• No other filter cleaning system cleans or prevents suction drop as well - no stopping to remove the hose and cover the inlet port or hose with your hand.

Grind Concrete, Remove Hot Mastics -----

• At the same time without damaging the filters

• Extract volumes of ultra-fine powder, even sticky terrazzo plastic powder without suction drop or damaging the filter

• No electronics or sealing-off the inlet to maintain clean filters.

Additional Features:

2 Motors - each with its on/off switch provides 258 CFM

• Motors are not used or shared for filter cleaning

• 2 motors, each dedicated to suction

• the Spin Clean filter has its own motor.

Heavy-Duty Components

• Well equipped for use in any industry or application requiring sustained suction

• Little or no operator invention to clean or maintain the filter

• Operates from 120 volt, 20 Amp Circuit

• Collect dry, moist, hot mastic debris at the same time without damaging the cyclone module or HEPA filter

• Industrial grade new generation motors

• Extremely durable filter for years of service

• Compact, Solid, Built Tough Construction:

  • HD, all steel construction

  • X-strong locking steel clamps

  • Large rear wheels with locking front casters.

Deflector Dust Shield

• Positioned above the inlet port, prevents incoming debris from directly blasting into the filter

  • Filter last longer

  • Helps prevent against dust accumulation on the filter's surface

• Creates a cyclonic force to prevent the debris from recycling back upwards and onto the filter.

HD Height Adjustment Lever
Model CV258B

• Lower, raise and lock-in the canister for easy mobility and transporting

• Compact height:  53", 70" operational height of Longo Bag model.